Bowling balls
Bowling Ball Fitting: What Happens at a Pro Shop Visit
Hand and span measurement, pitch, layout choice and drilling, explained step by step, plus plugging, refits and what a pro shop does
A bowling ball fitting is a pro shop visit where a technician measures your hand, picks your span, finger and thumb hole sizes and pitch, then drills a ball to that fit and to your own game. Expect your hand and grip strength checked, a layout chosen with you, the ball drilled, and the fit checked afterward so any hole can still be adjusted for comfort.
Have a bowling question? Search the learning center.
What a bowling pro shop does
A BowlersMart pro shop is the part of our store built around fitting and drilling your own ball instead of renting one. On site, our pro shops mill custom oval holes accurate to a thousandth of an inch for your own hand, choose layouts matched to your rev rate, speed and the lane conditions you bowl on, resurface and maintain balls with oil extraction, sanding and polishing, and offer USBC-certified coaching for every level.
A fitting is the foundation of that service: a technician checks your hand and flexibility, decides your span and hole sizes, sets your pitch, chooses a layout with you, drills the ball, then checks the fit afterward. The sections below walk through each of those steps.
Picking the ball itself, and the bag, shoes and accessories that go with it, is its own decision. See our bowling ball buyer’s guide, bag shopping guide, shoe shopper’s guide and accessories hub.
The fitting, step by step
| Step | What it covers |
|---|---|
| 1. Hand and flexibility check | The fitter looks at how your hand opens, closes and grips; that shapes every measurement that follows. |
| 2. Span | The distance from the front edge of your thumbhole to the front edges of your finger holes, measured with an oval disc or span ruler. |
| 3. Grip style | Conventional, semi-fingertip or fingertip, picked by your skill level and finger flexibility, plus an oval or lift finger grip. |
| 4. Finger and thumb hole size | Calipers measure the wide and narrow sides of an oval thumb hole, with a little extra room built in for your hand to swell. |
| 5. Pitch | The angle each hole is drilled at, set to how your own hand opens, closes and grips. See Pitch explained below. |
| 6. Layout | Matched to your rev rate, speed and the lane conditions you bowl on. See Layouts below. |
| 7. Drilling | The ball is drilled to those measurements. |
| 8. Test and adjust | The fit is checked after drilling and may need later adjustments, such as a hole beveled or opened slightly for comfort, especially if your hand swells over time. |
Steps from National Bowling Academy coaching (Scott Pohl) and our own pro shop pages; see Sources below.
Your hand changes with how often you bowl and even with the weather, so a fitting is something a pro shop keeps adjusting over time, not a single appointment.
Span, finger and thumb fit
Span is the distance from the front edge of your drilled thumbhole to the front edges of your two finger holes, measured with an oval disc or span ruler. That same ruler sorts grips into three types: conventional, semi-fingertip and fingertip, and which one fits you comes down to your own skill level and finger flexibility, not a fixed rule.
A finger grip, an oval or a lift texture seated in the hole, is a separate choice from the grip type itself: try each style and see which feels best. See our grip guide for how each grip type changes your hold and your release.
Pitch explained: forward, reverse and lateral pitch
Pitch is the angle each finger or thumb hole is drilled into the ball. A forward pitch angles a hole toward the center of your grip; a reverse pitch angles it away from center; a lateral pitch angles the thumb hole left or right instead of front to back. All three exist to make the ball comfortable to hold, not just to fill a hole: a pro shop sets each one to how your own hand opens, closes and grips.
Pitch set wrong can rub against your fingers and cause blistering. MDM Bowling Coaching has used a lateral pitch on the fingers specifically to stop a rub that was causing blisters, which is one reason pitch gets set for your own hand rather than a generic size.
Getting pitch right also changes how hard you have to grip. MDM Bowling Coaching points out that bowlers once set up with no pitch on the fingers and reverse pitch on the thumb had to grab the ball harder to clear it quickly, since that setup left the hand facing the ceiling instead of the pins. Decades of that extra grip pressure is a big part of why MDM Bowling Coaching sees so many longtime bowlers with sore or arthritic fingers and hands: more grip pressure makes a release less consistent, and under pressure, in a league night or a tournament, a bowler who has to grab the ball cannot stay relaxed. MDM Bowling Coaching recommends pitches run the other way today: more forward pitch on the thumb, more reverse pitch on the fingers, so the hand sits facing the pins and holds the ball with less effort.
How much pitch you actually need depends on your own hand. National Bowling Academy coaching (Scott Pohl) says a strong grip usually needs more reverse pitch in the thumb so it does not lock up and can clear the hole, a weak grip needs more forward pitch so the ball stays on the hand through the swing, and a thicker hand typically needs more reverse pitch in both the thumb and fingers to get out of the ball cleanly, while a very flexible hand gets the opposite adjustment. In the fingers, a forward pitch keeps your fingers in the ball a split second longer at release, while a reverse pitch tends to help a lower axis tilt and a more forward roll.
Pitch is personal: a pro shop sets yours from your own hand and flexibility at a fitting (see The fitting, step by step above).
Thumb and finger options: interchangeable thumbs and slugs
A consistent thumb hole matters once you are bowling enough to build a real arsenal of balls, and pro shops offer two ways to get it beyond a plain drilled hole: an interchangeable thumb system or a thumb slug. An interchangeable thumb system lets you drill one thumb fit that works in every ball you own, using either a tab-and-lock piece or a screw-in piece, and the piece can be swapped for a different size as your thumb changes, rather than relying on tape to get the feel right. Because USBC requires a removable device like this to be non-metallic, these pieces are made of plastic and do wear out over time. A thumb slug is another option: a plug seated in the thumb hole.
An interchangeable thumb system should be installed by a pro shop technician experienced with that specific system. Installed wrong, a piece can be hard to get in and out, fail to lock, or break under force.
USBC’s rules also require any removable insert to be non-metallic, locked in place during delivery, no denser than 1.5 g/mL, and never used to adjust the ball’s static balance. See our finger grips and inserts guide for the full rule and for drill sizes and materials by brand.
Layouts: what the pro shop decides with you
Our pro shops choose your layout matched to your rev rate, speed and the lane conditions you bowl on, built from the measurements taken at your fitting.
Our drilling layouts guide explains the terms a pro shop uses for a layout, and our layout studio lets you draw a layout on the ball and convert it between Dual Angle, Pin Buffer, 2LS and PAL.
Custom fitting vs. basic online drilling
| Custom fitting at a pro shop | Basic online drilling | |
|---|---|---|
| Which balls | The ball you bring in or buy at the shop. | Select balls only: the ones that show the Basic Drilling Service option on their product page. |
| Where it happens | At a pro shop, in person. | Chosen on the ball’s product page when you order online. |
| What gets chosen or measured | Your actual hand: span, hole sizes and pitch, measured at the visit. | Right or left hand and one of five standard span sizes, X-Small to X-Large. |
| Who drills it | A pro shop technician. | Drilled to those sizes; the ball ships in about 7 to 10 business days. |
| Price | Varies by shop; the shop quotes before any work. | See our drilling cost guide for the current online drilling price. |
Pro shop pricing is set by each shop and quoted before any work.
Plugging, redrilling and used balls
Plugging fills an old hole with a resin material so the ball can be redrilled for a new layout or a different bowler, which is how a used ball gets a fresh fit instead of staying stuck with its last owner’s holes. Once the plug has set, a pro shop trims it down until it sits flush with the ball’s original surface, the same standard USBC sets for any plug or insert: it cannot extend past the ball’s surface.
USBC also requires that a slug used to redrill a hole be drilled completely through with no interior void, and that the plug or slug material itself be “like, although not the same as,” the ball’s original material, with a density between 0.9 and 1.5 g/mL. A pro shop can tell you whether a specific ball, and its existing holes, is a good candidate for a new layout.
One reason to plug and redrill an older ball is a balance hole: USBC banned balance holes outright starting August 1, 2020, so any gripping hole without the thumb or fingers in it throughout the approach is now illegal. A ball drilled before that rule may need its old balance hole plugged before it can be used in USBC-certified play.
What to bring, and when to get refit
Bring your current ball or balls if you have them, even if you are not replacing them: having something to compare against gives the fitter a real baseline instead of a guess, and lets them check whether your existing holes are already causing you to squeeze or overgrip.
Hands are not the same from one day to the next. National Bowling Academy coaching notes that your environment and the climate change your hand enough that a fitting has to account for it, and every hole drilled needs a little room for your hand to swell. If you bowl more often, your hands may swell further over time and your holes may need to be opened or adjusted. Fit is an ongoing process, not a single appointment, so come back any time a ball stops feeling the way it did when it was new.
Questions bowlers ask
What is a pro shop?
The part of a bowling retailer built around fitting and drilling your own ball: measuring your hand, choosing span, hole sizes, pitch and layout, drilling the ball, and offering coaching, resurfacing and maintenance on top.
What is pitch in bowling?
The angle a finger or thumb hole is drilled into the ball. A forward pitch angles the hole toward the center of your grip, a reverse pitch angles it away from center, and a lateral pitch angles the thumb hole left or right. A pro shop sets your pitch to your own hand and flexibility.
What is span in a bowling ball?
The distance from the front edge of your thumbhole to the front edges of your finger holes, measured with an oval disc or span ruler. It is one of the measurements a pro shop takes at a fitting, alongside hole size and pitch.
What’s the difference between forward and reverse pitch?
A forward pitch angles a hole toward the center of your grip and tends to hold the ball on your hand a little longer at release. A reverse pitch angles it away from center; in the thumb it helps the ball clear sooner, and in the fingers it tends to help a lower axis tilt and a more forward roll. Which one you need depends on your own hand and grip strength.
What is an interchangeable thumb?
A thumb fit built into a removable piece, either a tab-and-lock design or a screw-in design, that works in every ball you own and can be swapped for a different size as your thumb changes. USBC requires the piece to be non-metallic, which is why it is made of plastic and does wear out over time.
Can a used bowling ball be redrilled for a new owner?
Yes, if a pro shop can plug and redrill it. A pro shop fills the old holes with a plug material, trims it flush with the ball’s surface once it sets, and drills a new layout for the new bowler. USBC requires a slug used to redrill the hole to go completely through with no interior void, and the plug or slug material to fall within its density rule. A pro shop can tell you whether a specific ball is a good candidate.
What’s the difference between custom fitting and basic online drilling?
Custom fitting happens in person at a pro shop, where your actual hand, span, hole sizes and pitch are measured. Basic online drilling is offered on select balls only, and is chosen on the ball’s product page: right or left hand and one of five standard span sizes, X-Small to X-Large, with the ball shipping in about 7 to 10 business days. See the comparison table above.
How much does a bowling ball fitting cost?
It varies by shop; ask your local BowlersMart pro shop for a quote before any work. Online basic drilling has its own listed price on our drilling cost guide.
Sources and method
USBC Equipment Specifications and Certifications Manual. The gripping-hole and balance-hole rules, and the plug, insert, slug and removable-device rules.
MDM Bowling Coaching. Pitch definitions, grip-pressure and comfort reasoning, and lateral finger pitch for rubbing, in Pitch explained above.
National Bowling Academy coaching (Scott Pohl). Span and grip-type measurement, thumb and finger hole sizing, pitch guidance by hand and grip type, and fit as an ongoing process.
Ebonite. What a slug is and the flush-trim step in Plugging, redrilling and used balls above.
Our pro shop pages. The pro shop service descriptions in What a bowling pro shop does above.
Our drilling cost guide. Online basic drilling: hand and span choice, and shipping time.
Our tools and guides. The grip guide, drilling layouts guide, layout studio, finger grips and inserts guide, drilling cost guide, buyer’s guide, bag shopping guide, shoe shopper’s guide and accessories hub are linked where they apply.
Next lesson
Free shipping on US orders. 60-day returns on new, unused bowling balls; see our return and exchange policy.


Pay in 4 with Afterpay
Personalized Bowling Bags
Personalized Shammies
Personalized Bowling Jerseys
Shop Hammer Balls
Shop Epic Shoes
Shop Epic Bags